Brakes/Levers/Pads
- Pair of D-Type disc brake pads without fins, for 1 caliper
- Available with Resin or Metallic brake compound
- Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers
- Can be used as a lower cost alternative to H-Type or N-Type pads
- Includes spring and pin
- Pair of H-type disc brake pads with fins, for 1 caliper
- Available with resin or metallic compound
- Fits Shimano 4-piston calipers Saint BR-M820 and BR-M810, Zee BR-M640 & XT BR-M8020
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than D-type pads
- Includes spring and split pin
- Pair of K-Type disc brake pads without fins, for one caliper
- Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions
- Steel backplate for lower cost or Ti backplate for improved heat management and lower weight
- Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400
- Also compatible with XTR BR-M9100 calipers
- Interchangeable with L-type finned pads (except for XTR BR-M9100)
- Pair of N-type disc brake pads with fins, for 1 caliper
- Fits 4-piston SLX, XT and XTR calipers from 12-speed generation groups
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical downhill stretches
- Longer lasting than D-type pads
- Spring included
Model Compatibility: Shimano BR-M9120, BR-M8120, BR-M8020, BR-M7120, BR-M820, BR-M810, BR-M640, BR-MT520
- Dual pivot caliper brake
- Melt forged aluminum arms
- Quick release mechanism
- Dimension : 39-52mm
- Designed for 28C tire
$1.25
Magura hs33/hs11 compression sealing washer bag of 20
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers
$1.50
Magura olives (compression ferrule) bag/20
- Small parts used to install hydraulic hose for Magura disc brakes.
- Compatible with Campagnolo H11 brake/shift levers
$1.90
Hope Disc Brake Hose Small Parts
· This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$3.19
• Compatible with most side pull and center pull brakes
• All weather compound
$3.59
- Includes everything needed to mount non-threaded brake pads to cantilever brake arms
$4.00
Disc Brake Adapters
$4.00
- Replacement barrel adjuster for 105 5800 brakes
$4.19
- Includes everything needed to mount hex nut style (non-recessed) caliper brakes
- Model: Front
$4.28
Brass hose insert for Hope hydraulic disc brakes.
$4.99
Our mountain rim brake pads are available both with a threaded or smooth post.
$4.99
Increase your brake performance with Origin-8's Super Noodle. The Super Noodle allows you to run housing all the way to the brake, making the brake respond much smoother and stronger than with a steel or alloy noodle. This sealed noodle also prevents moisture and grime from corroding the cable.
- Lightweight resin/alloy design
$5.00 - $26.53
- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing
$5.00
- Parts listed are for servicing and overhauling a single master cylinder/lever assembly
$5.29
- Compatible with most side- and center-pull brakes
- Excellent for BMX and freestyle
- Hex nut type
- All-weather compound
$5.99
Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike.
- Fits into fork brake boss holes for V-brake to disc conversion
$6.00
- Replacement barrel adjuster for FR5 and SD7 levers
- Includes one pair
$6.00
Shimano Replacement pads for Mountain brake shoes
- Color: Black
- Intended Brake Type: Linear Pull
- Pad Attachment Style: Threaded Post
- Pad Type: Replacement Insert - Cartridge
- Rim Compatibility: Standard
- Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600
- M70R2: Severe condition brake pad, high performance in dry or wet conditions
$6.29
•55mm cartridge inserts
•Compatible with most road caliper brake pad holders
•All weather performance
Page 1 of 24
Next page