Hydration

The Bossless Bottle Cage lets you add a bottle (or three) to any bike—mounts or not. We designed it so Tern bike riders can add extra water bottles to their seatposts or handleposts, but it works just as well on bossless track bikes, under-equipped road bikes, and long-haul tourers. - Velcro fastening system secures the cage without water bottle mounts, bosses, or eyelets - Mounts to any seatpost, handlepost, seat tube, head tube, or down tube with a diameter of 22 – 41 mm - Sprung cage design snugly grips small and large bottles (63 – 73 mm in diameter) for a rattle-free fit - Grippy rubber base prevents movement during rides - Optimized for stainless steel bottles thanks to non-scratch polycarbonate

Because of the unique design of folding bikes, bottle cages often sit horizontally—a liability with the wrong cage. The Tern Bottle Cage is engineered so your bottle stays in place, even on steep descents and at abrupt stops. It’s light and strong, and because it’s made of polycarbonate, it will leave your stainless steel bottles scratch-free. - Flexible cage arms grip bottles so they stay put in horizontal Tern bottle mounts - Securely fits large and small water bottles (63 – 73 mm in diameter) - Snug, rattle-free design - Polycarbonate material will not scratch stainless steel bottles - Pairs well with reusable bottles like the Tern/Miir collaboration and Klean Kanteen

The Side Entry cage is great for smaller frames or when the main triangle space is being shared with a frame bag. - Two-piece construction allows set up for right or left side use - 3/4 wrap bottle cage securely holds a bottle over burly terrain - Flared "wings" in the opening make getting a bottle in and out easy - Constructed of 6463 T5 Aluminum - Weighs only 43g

The Portland Design Works Sparrow Cage is made from a single sheet of lightweight 5052 alloy. The Sparrow's wings fold in to securely cradle your water bottle and the cut outs help keep the cage light. Get a Sparrow and make your ride fly. - Constructed of 5052 alloy - Includes two stainless bolts for installation  - Weight: 57g (2oz) - Lifetime PDWarranty

Everything you love about the Daylite with additional storage space and organization options. The Daylite Plus shines on its own for daily needs and adventures, as well as continuing to meet the needs of travelers in need of additional carry options. Built with an eye toward sustainability using high-quality bluesign-approved recycled fabrics, GRS-certified recycled polyester and a PFC-free DWR coating. Versatile The Daylite Series accommodates a kaleidoscopic range of activities from day hikes on local trails to festivals, farmers markets and global travel. Sustainable Materials Constructed with main body bluesign-approved fabrics, GRS-certified recycled polyester and PFC-free DWR; a sustainable build that's durable and can take years of everyday wear and tear. Compatibility Compatible as an attachment to several Osprey travel and backpacking bags for additional storage and carry options, the Daylite and Daylite Plus are great bags to have around town or as a summit pack. - Large panel-loading main compartment - Attaches to a variety of compatible Osprey packs - Multifunctional interior sleeve for hydration reservoir, 15" laptop or tablet - Dual side compression straps - Dual water bottle side mesh pockets - Front pocket with organization and key clip - Front panel zippered slash pocket - Front panel shove-it pocket - Harness grab handle doubles as a luggage pass-thru - Removable foam frame sheet suspension with center stiffener allows dynamic body movement - Mesh-covered die-cut foam backpanel provides comfort and ventilation - Spacer mesh harness with integrated handle. Additional die-cut EVA foam padding (Daylite Plus only). Adjustable sternum strap with whistle - Removable 20mm webbing hipbelt

Make any pack Hydraform Reservoir-compatible with Osprey's Hydraform Magnet Kit. This handy kit includes three detachable sternum-strap magnets.

Osprey’s Hydraulics 2L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Osprey’s Hydraulics 3L Reservoir by Hydrapak is ideal for large-volume packs and long-duration activities. The HydroStatic backerplate provides structure for easy loading into a full pack and maintains a flat profile. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Osprey’s Hydraulics Bite Valve provides a high-quality replacement for your old, neglected and beat up bite valve. The bombproof ¼ twist shut-off design guarantees you won’t experience any unpleasant leaks.

The Bite Valve Cover keeps your reservoir bite valve free from dirt and dust on the trail.

Osprey’s Hydraulics LT 2.5L Reservoir by Hydrapak is made for light and fast activities where weight and balance are critical. Twin-welded chevron baffles stabilize the water and maintain a flat profile. The streamlined design allows for easy loading into internal hydration sleeves. Thoughtful design makes filling, cleaning and most importantly staying hydrated on the trail easier than ever. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

• Installs on any 1/4-inch (.635cm) hose for easy disconnect/connect. • Bonus extra male piece and hose to connect to water filters.

The taste of water from a funky reservoir is high on the list of experiences that one should combat at all costs. This cleaning kit comes complete with a reservoir cleaning brush, delivery system brush, and a drying rack to help ward off uninvited microbial visitors looking to take up residence in your reservoir.

When it’s time to replace the hose on your existing hydration system, Osprey’s Hydraulics Reservoir Hose is the answer. Made of high-quality quarter inch tubing for dependable performance and featuring a high flow rate, it will bring new life to your hydration system. All parts are BPA-free, phthalate-free, lead-free, guaranteed. All materials are certified food safe according to FDA and EU regulations.

Replacing old bite valve sheaths helps maintain a sanitary hydration system. Osprey’s Bite Valve Sheaths provide a soft surface for your chompers to sink into when you’re hydrating on the fly. Also perfect for those who can’t help but chew through the bite valve like their old #2 pencils in high school.

Hoses need to be wrangled, lest they become too uppity. Osprey's Hydraulics Three-Magnet Kit will hold things together. This pack comes with 3 detachable sternum strap magnets, and it'll make any pack Hydraulics Reservoir compatible!

Ideal for fast rides that require only the water on your back, the Katari 1.5 lets you carry the bare minimum. The high-quality, low-profile design features an included 1.5-liter reservoir that slides into its own exterior pocket with a bite valve that attaches magnetically to a sternum strap. A well-ventilated mesh harness offers exceptional airflow and rolled, soft-edge shoulders provide contoured comfort and stability. In the event you find yourself outside when the sun goes down, a loop for your rear tail light lets you be seen. Made with mountain bikers in mind, but practical for any activity where hydration is a must. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 1.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included)

When you want to carry water on your back—and almost nothing else—the Katari 3 has you covered. Low profile but high quality, you'll reach for this pack before your next quick pedal (or ski, or hike) and hardly notice it's there. An airmesh-covered backpanel and rolled soft-edge shoulders deliver excellent ventilation, comfort, and stability, while allowing for full range of motion. A dedicated external sleeve holds an included 2.5-liter reservoir and stretch-mesh side pockets let you grab bars, gloves, and other small essentials on the go. Clip your tail light on the bottom loop to quell any concerns about making it out of the trail before the sun makes its way to the horizon. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets

Want to hit the trail for a quick ride that calls for water and just a few minimal pieces of gear? The low-profile Katari 7 is your go-to pack. A light and airy mesh harness with rolled soft edges provide contouring comfort around your shoulders for excellent fit, while a removable webbing hipbelt enhances stability. An included 2.5-liter reservoir slips into an external hydration sleeve with a magnetic bite valve attaching to the sternum strap. A vertical front zip pocket is just roomy enough to carry the essentials, like a spare tube and tools or a rain jacket. Store food and other small items you want to access quickly in stretch-mesh side pockets. Functional and versatile, no one is stopping you from using this pack for activities in the off season. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets - Front panel vertical zip compartment with tool organization

Sometimes the water on your back is the only thing you need, especially when you're planning on riding a fast and familiar route. The Kitsuma 1.5 is the ideal pack for women who want just that. Designed with the mountain biking minimalist in mind (but suitable for many activities), an included 1.5-liter reservoir in its own dedicated sleeve keeps you hydrated on the trail. Unassuming shoulder straps with rolled edges provide a comfortably soft and stable women's-specific fit. Lightweight mesh-covered foam delivers admirable airflow, while permitting maximum body movement. A loop for your tail light at the bottom of the pack keeps you visible to others when the light begins to fade. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Women's-specific fit and sizing - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 1.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included)

Not every ride calls for a big pack and lots of gear. When you're looking to get in a quick ride that requires water and not much else, the women's-specific Kitsuma 3 is a quality and functional inconspicuous solution to your hydration needs. Low-profile shoulder straps give way to rolled-soft edges that offer excellent fit and stability. Stay cool and dry, even on hot and steamy days, with a lightweight AirScape airmesh backpanel that also grants full body movement. An independent hydration sleeve holds an included 2.5-liter reservoir with a bite valve that attaches to your sternum strap via magnet. Store small easy-access items, like energy bars and arm warmers, in the side mesh pockets and attach a rear bike light on the designated loop should you pedal close to sunset. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Women's-specific fit and sizing - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets

When you don't need to carry much except water and a few essentials, the women's-specific Kitsuma 7 is an ideal hydration-carrying solution for bike rides and beyond. A vertical-zip front compartment is big enough for a spare tube, multi-tool, and light windbreaker. Behind it, a separate external sleeve stores an included 2.5-liter reservoir with a magnetic sternum-strap attachment for the bite valve. An AirScape backpanel features outstanding ventilation via airmesh-covered foam and a center air channel. A super-light and airy harness with rolled, soft edges make for a pack so stable and comfortable you'll barely notice it. Side mesh pockets store things you'll want to access easily, like food or arm warmers. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Women's-specific fit and sizing - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included) - Dual-stretch-mesh side pockets - Front panel vertical zip compartment with tool organization

A kid-specific hydration pack, inspired by Osprey's Verve and Viper line, keeps little shredders hydrated. - Front Shove-It Pocket and external zippered pocket - Blinker light attachment - Includes Hydraulics LT 1.5L reservoir - Sternum strap with integrated whistle - WARNING! High Energy Magnet could affect the function of electronic instruments like pacemakers or avalanche beacons - WARNING! Swallowing hazard. Not for use by children under four years old. See Osprey Hydraulics Owner's Manual for more information

Let's face it, not every ride happens the way we want it to. Your bike can break, the weather can change, and the trail may not be as well-marked as you'd like it to be. The Raptor 10 is specifically designed with these challenges in mind. A premium pack that carries it all without weighing you down, the Raptor features winged shoulder straps that contour to the shape you're in when you reach for your handlebars—delivering superior stability even when the trail turns super techy. AirScape suspension evenly distributes your load while permitting dynamic range of motion, and a mesh-covered foam backpanel leaves you well ventilated. An included 2.5-liter reservoir slides into its own dedicated compartment for fill-up simplicity, and another devoted space at the base of the pack houses a Tool Roll for your mini-pump, tire lever, hex keys, and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

Made to haul all the gear you need—but flexible enough to slim down for shorter rides—the Raptor 14 is our premium pack for mountain bikers who demand top quality from their gear. Don't like how hydration packs feel over gnarly terrain? Neither did we. So we designed shoulder straps in the shape of wings that curve the same way you do when you're in riding position. An AirScape suspension and backpanel provide a close-to-body carrying experience and elevate comfort and stability to unprecedented levels, while still allowing for dynamic body movement. An included 2.5-liter reservoir with direct-zip hose access ensures straightforward loading, while a tool roll organizes the ingredients to get you moving again should you have any trailside troubles. Standard helmets attach with our LidLock system and side compression straps will fit your full face helmet. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment - Front panel zippered stash pocket - Side compression straps double as a full face helmet carry AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability"

When you're out for an all-day ride—or when your ride unexpectedly turns into an all-dayer—you need a pack that carries everything without weighing you down. The women's-specific Raven 10 is stable, comfortable, and specifically designed with mountain bike challenges in mind. You want a pack that doesn't bounce all over the place, and so do we. So, we made one. The shoulder straps on this pack are shaped like wings and naturally curve when you resume your natural riding position. An AirScape suspension system and backpanel keep your bag close to your body while allowing for dynamic body movement and unmatched comfort and ventilation. An integrated 2.5-liter reservoir keeps you hydrated, and a dedicated compartment at the bottom of the pack holds a Tool Roll that conveniently stores everything from mini-pumps to tire levers and more. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Women's-specific fit and sizing - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

The women's-specific Raven 14 is a premium pack made for high-quality mountain bikers who desire high-quality gear. It can haul everything you need for high country excursions with the flexibility to accommodate shorter rides—and less gear—too. We set out to solve the issue of bouncy hydration packs, and found the answer in our BioStretch harness—a wing-shaped shoulder strap solution that takes the same shape you do when you're in a natural riding position. Unparalleled stability meets maximum comfort and ventilation with an AirScape suspension system and backpanel. An included 2.5-liter reservoir slips into its own hydration sleeve with direct-zip access, and a space at the bottom of the pack is reserved for a removable Tool Roll. Standard and full-face helmets can be secured to the pack via the LidLock attachment or side compression straps. TOOL ROLL - Never dig for your tools again. The dedicated lower compartment holds a removable pouch to organize your tools so you can get back to what matters—the ride. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment with direct-zip access and sternum strap magnetic bite valve. LIDLOCK - Attach your helmet securely to the outside of your pack without wasting the space inside. Perfect for wrapping up a long ride at your local brewery. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Women's-specific fit and sizing - Countouring AirScape backpanel and bike-specific shape harness - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Hydration sleeve with direct-zip access and hose path for easy loading - Lightweight sternum strap magnet for easy access to water - Scratch-free, heat-embossed zippered slash pocket - Stretch mesh zippered hipbelt pockets - LidLock bike helmet attachment - Stretch mesh front pocket for quickly stashing extra gear - Blinker light attachment and reflective patch for safety - Removable roll-up tool pouch keeps tools handy and organized - Bike tool organization in main compartment AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Mesh-covered, extra deep ridged foam allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation HIPBELT - Airmesh wrap hipbelt with zippered pockets provide stability and breathability

Stability and comfort combine in this svelte women's-specific mountain biking pack that's a great fit for any trail—from gentle fire roads to technical singletrack. With high-performing features and a little extra room for a little extra gear, the Salida 12 is the "Goldilocks" of packs you'll find yourself reaching for to accompany meetups at your local trailhead (and meetups at your local watering hole afterward). The main compartment zippers wide open to reveal pockets for bike tool organization and enough space to stuff a spare tube, an extra layer, and your lunch. An AirScape backpanel offers max ventilation and stability while rolled, soft-edge shoulder straps offer a nice distribution of weight and a no-pinch design. A separate compartment houses an included 2.5-liter reservoir, and zippered hipbelt pockets store things you'll want easy access to, like trail snacks. A LidLock attachment holds a standard-size helmet on the front of the pack while side compression straps expand to fit a full face helmet as well. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Women's-specific fit and sizing - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability

Riders looking for a low-profile lumbar pack with integrated hydration need look no further than the Seral 4. This slim waistpack features a 1.5-liter bladder with our updated high-strength magnetic coupling for improved hose management even in rough terrain. the Seral 4 has enough storage capacity for ride essentials, such as a spare tube, CO2 and multi-tool and, of course, snacks. Constructed with high-quality bluesign-approved recycled high-tenacity nylon with a PFC-free DWR coating. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5 L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Main compartment tool organization and internal zippered pocket - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Prefer an off-the-back hydration solution instead of an over-the-shoulder pack? The Seral 7 lumbar pack was made for you. Featuring an included 1.5-liter lumbar reservoir and magnetic bite valve that attaches to the hipbelt for easy access. Some lumbar packs have a tendency to creep around while you ride, we promise this one won't. Compression straps pull the pack into your lower back and wrap around your hips for supreme stability, even over technical terrain. A zippered main compartment and hipbelt pockets fit your spare tube, patch kit, CO2 inflator and more. Lumbar Carry For riders who require hydration or gear storage while riding, but prefer the off-the-back carry and minimalism provided by lumbar packs. Ride Stability Our bike-specific, angled hipbelt and compression straps provide stability and comfort by keeping the pack close to your body. This is created by a breathable airmesh wrap hipbelt that contours over the hipbone, Osprey's ErgoPull cross-body waist strap closure system that pulls the pack into the lumbar and side compression straps that pull the load close to your body, providing the most comfortable, secure and stable carry. Included Reservoir A dedicated hydration compartment stores an included 1.5L lumbar reservoir for short to medium rides and compresses for stable carry, while the hose magnet attaches to the bite valve for easy access while riding. Sustainable Materials Constructed with PFC-free recycled bluesign-approved nylon; a sustainable build that's tough and durable to endure years of riding. - AirScape backpanel with contouring lumbar wrap provides maximum stability - Included Osprey Hydraulics 1.5 L lumbar reservoir by Hydrapak - Magnetic hipbelt bite valve attachment - Large zippered main compartment with reservoir sleeve - Easily accessible zippered front pocket with internal tool organization - Dual zippered hipbelt pockets - Blinker light attachment with reflective graphic - Extra-thick ridged foam with center air channel for excellent ventilation - Airmesh wrap hipbelt with zippered fabric pockets provide stability and breathability - ErgoPull waist strap closure system allows for proper snug and stable fit

Designed to do it all—and hold just enough gear—the Siskin 12 is a mountain biking pack with many of the high-performing features you'd expect from Osprey. The mesh-covered AirScape backpanel provides excellent ventilation and maximum range of motion—go ahead, get sendy. A LidLock attachment on the front of the pack can store a standard size helmet while side compression straps expand to hold a full face helmet. The main U-zip compartment houses organization pockets for your bike tools and room for a layer, a sandwich, or some light mountain bike padding. Rolled, soft-edge shoulder straps keep the pack stable over technical terrain and ensure no pinching points when full. A dedicated compartment holds an included 2.5-liter reservoir and zippered hipbelt pockets provide easy access to bars during the ride or a bottle opener afterwards. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability

When a pack that holds only water is too small and a pack that holds everything is too big, the Siskin 8 is just right. A high-performing mountain biking pack that provides stability and comfort on the gnarliest of trails, the Siskin allows you to bring just what you need (and nothing more) on your ride. A direct-access zip path leads to an included 2.5-liter reservoir, and a U-zip main compartment opens wide to stuff a spare tube, flat repair tools, and your PB&J inside. A mesh-covered foam backpanel offers ventilation and allows for lively movement while keeping your pack close to your body, even when you're riding loose. The front of the pack features a LidLock attachment point for a standard-size helmet, while side compression straps expand to fit a full face. VARIABLE HELMET CARRY - Includes Osprey's LidLock helmet carry for traditional helmets and front panel upper compression straps for full face helmets. RESERVOIR INCLUDED - Osprey Hydraulics LT 2.5L reservoir keeps you hydrated all day long and stores in a dedicated hydration compartment to protect pack contents from accidental spills. MOUNTAIN BIKE-FOCUSED FEATURES - Multi-pocketed tool organization and large bucket main compartment stores and protects all your essential gear. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. FEATURES - Included Osprey Hydraulics LT 2.5L reservoir by Hydrapak with direct-zip access - Magnetic sternum strap bite valve attachment - Dual upper side compression straps double as a full face helmet carry - Full front panel U-zip to main compartment and tool organization - Front panel shove-it pocket - LidLock helmet attachment - Blinker light attachment - Zippered hipbelt pockets - Zippered scratch-free, heat-embossed slash pocket AIRSCAPE SUSPENSION - Atilon foam framesheet enables dynamic body movement and evenly distrubutes load across the entire backpanel AIRSCAPE BACKPANEL - Mesh-covered extra deep ridged foam with center air channel allows maximum ventilation while keeping the load close to the body BIOSTRETCH HARNESS - Soft breathable spacermesh contact surfaces and die-cut foam ventilation - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability

If you like carrying your hydration on your back, but not much else, the women's-specific Sylva 5 is your pack. An included 2.5-liter reservoir keeps you from going thirsty and a separate main compartment lets you bring along the essentials. Perfect for pedaling in hot and humid climates, a "trampoline-style" AirSpeed backpanel creates a comfortable fit and a breeze at your back. The BioStretch harness offers superior stability with wing-shaped shoulder straps that mimic the natural arc you assume when you're in a riding position. An integrated removable raincover keeps your stuff dry and attachment points exist for your helmet and tail light. AIRSPEED VENTILATION - Tensioned backpanel reduces sweating, and the LightWire frame takes the weight off your shoulders and transfers it to your hips to provide stable, comfortable, and ventilated carry. INTEGRATED RAINCOVER - A little weather shouldn't stop anyone from riding. The integrated high-visibility raincover keeps your pack and gear dry on your ride from start to finish. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Women's-specific fit and sizing - Maximum ventilation with AirSpeed backpanel and bike-specific shaped harness - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Front stretch mesh pocket - Scratch-free, heat-embossed zippered slash pocket - LidLock helmet carry - Blinker light attachment - Integrated removable high-visibility raincover - Magnetic sternum strap for quick access to reservoir bite valve - Zippered tool organization pocket - Dual stretch mesh side pockets - Dual upper and lower side compresion straps - Padded spacermesh hipwings with webbing ErgoPull waist strap provides comfort and stability AIRSPEED SUSPENSION - Peripheral LightWire frame creates a platform for a contoured tensioned mesh backpanel AIRSPEED BACKPANEL - 3D-tensioned breathable mesh backpanel provides extreme ventilation with a comfortable fit BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation

When you want to carry hydration on your back—and not much else—the Syncro 5 is your answer. It's everything you've come to expect in an Osprey pack, plus an AirSpeed 3D-tensioned backpanel that provides ultimate ventilation. Take the Syncro along on your next ride in the Arizona desert or humid Pacific Northwest and you'll understand. Comfort and stability are key with shoulder straps curved in the same position as your natural riding position and padded hipwings featuring an ErgoPull waiststrap. A 2.5-liter reservoir and high-visibility raincover are also included. AIRSPEED VENTILATION - Tensioned backpanel reduces sweating, and the LightWire frame takes the weight off your shoulders and transfers it to your hips to provide stable, comfortable, and ventilated carry. INTEGRATED RAINCOVER - A little weather shouldn't stop anyone from riding. The integrated high-visibility raincover keeps your pack and gear dry on your ride from start to finish. RIDE STABILITY - Our new "winged" harness wraps the upper shoulders for added stability and keeps the pack comfortably close to your body. FEATURES - Maximum ventilation with AirSpeed backpanel and bike-specific shaped harness - Dedicated hydration compartment with included Osprey Hydraulics LT 2.5L reservoir by Hydrapak - Front stretch mesh pocket - Scratch-free, heat-embossed zippered slash pocket - LidLock helmet carry - Blinker light attachment - Integrated removable high-visibility raincover - Magnetic sternum strap for quick access to reservoir bite valve - Zippered tool organization pocket - Padded spacermesh hipwings with webbing ErgoPull waist strap provides comfort and stability AIRSPEED SUSPENSION - Peripheral LightWire frame creates a platform for a contoured tensioned mesh backpanel AIRSPEED BACKPANEL - 3D-tensioned breathable mesh backpanel provides extreme ventilation with a comfortable fit BIOSTRETCH HARNESS - Osprey engineered bike-specific harness with winged shoulder strap shape contours the shoulder providing superior comfort and stability - Soft breathable spacermesh contact surfaces and die-cut foam ventilation

Designed for boys 4-12 years old, the pint-sized Talon Jr. is at home hiking, biking and more. Comfortable AirScape suspension flexes and moves with the child's body and a seamless lumbar-to-hipbelt wrap allows for all-day adventures. Featuring durable, lightweight fabric; hipbelt pockets within reach; an external reservoir sleeve; and a loop to attach a blinky light. Airscape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Stretch mesh front panel pocket - Side stretch mesh pockets - Top panel zippered slash pocket - LidLock bike helmet attachment - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual mesh hipbelt pockets - Blinker light attachment (light not included) Airscape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces Biostretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle Biostretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Crossbody ErgoPull hipbelt system to pull lumbar into body

At home hiking, biking and more, the Tempest Jr. is designed for girls aged 4-12 years old. Featuring comfortable and breathable AirScape suspension and a seamless harness-to-hipbelt wrap that flexes with the child's body during the sport of their choice. Constructed with durable, lightweight fabric; easy-to-reach hipbelt pockets; an external reservoir sleeve; and loop for a blinky light. Airscape Suspension An injection-molded, die-cut foam AirScape backpanel creates a breathable, close-to-body fit. A flexible BioStretch harness and hipbelt, with a continuous lumbar-to-hipbelt wrap, allow for dynamic movement. Light and Fast A lightweight pack series designed with optimal stability for dynamic movement even on the most technical terrain. Multi-Sport From top-loaders to lumbar packs and everything in between, the Talon/Tempest Series accommodates the needs of hikers, bikers and more. Sustainable Materials Constructed with high-quality bluesign-approved recycled high-tenacity nylon. - Dual-zippered panel access to main compartment - Internal zippered mesh pocket with key clip - Stretch mesh front panel pocket - Side stretch mesh pockets - Top panel zippered slash pocket - LidLock bike helmet attachment - External hydration reservoir sleeve - Easy-access, expandable stretch mesh harness pocket - Dual mesh hipbelt pockets - Blinker light attachment(light not included) Airscape Backpanel - Injection-molded AirScape framesheet with die-cut foam provides a close-to-body stable fit while offering flexibility and ventilated airflow channels for active use - Mesh-covered foam lumbar for lightweight and comfortable contact surfaces Biostretch Harness - Integrated BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Harness system easily adjusts to fit various torso lengths - Adjustable sternum strap with safety whistle buckle Biostretch Hipbelt - Seamless lumbar-to-hipbelt body wrap and BioStretch seams offer maximum flexibility without sacrificing stability for dynamic body movement - Spacermesh over die-cut foam provides breathable, comfortable contact surface - Crossbody ErgoPull hipbelt system to pull lumbar into body

Features - Composite injection molded technology - 30% lighter without sacrificing stiffness - Right or left side pull cage option is perfect for off-road or small frames - Weight: 26g

Features - UD carbon fiber - Specifically designed for the performance rider - Super lightweight at just 14g

Features - High flexibility injected Nylon material - Secure bottle design—no drop guarantee - Right side pull cage option is perfect for off-road or small frames - Weight: 41g

Cage: - Improved reinforced composite material - Redesigned cage bracket Tool: - Nylon reinforced composite storage box - Chromium-vanadium steel body - Clutch 9: 2, 2.5, 3, 4, 5, 6, and 8mm hex; T25 and flat-head screwdriver

Features - Alloy bottle cage - 6mm alloy rod - Tough and still flexible - Compatible with various water bottles

- Individually packaged - Enables mounting of a bottle cage in a variety of positions - Fits 22.2-26.0mm handlebars

- DoubleSpring Cap - FDA Approved - 100% BPA and Phthalate Free - Made in the USA - Perfect Fit with Giant and Liv Bottle Cages

Fly Elite is the lightest sports bottle available worldwide. Its record 54g weight (550ml) is achieved through its variable thickness. Thicker on the base and thinner on the central body, this doesn't just make it possible to use less plastic material, it also ensures a tight grip when cycling and an easy to squeeze ergonomic structure so liquid flow is abundant with the lightest pressure. - Innovative, odorless, soft, and resistant plastic materials. - Compact design - Extreme liquid flow

A new design and improved cleanability maintains the Podium bottle's position as the best-of-the-best within the cycling industry. This premium bike bottle prioritizes performance and excellent cage fit above all else for both professional and recreational users. Easy to squeeze and always BPA free, the Podium is the ultimate bottle for rapid and reliable hydration. - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

Derived from superior materials including Trutaste Polypropylene with HydroGuard, and featuring double-wall insulation, the CamelBak Podium Chill Insulated Water Bottle is the perfect cold-storage water bottle for cycling adventures. Keeping your body properly hydrated and improving your on-road performance is simplified thanks to this revolutionary sports bottle. Cycling enthusiasts have for years trusted CamelBak to provide them superior bottles for water that are optimized for peak performance. And the Podium Chill bike water bottle continues to elevate CamelBak as the best of the best in the cycling world. This premium bicycle water bottle has been reengineered to securely fit in a variety of bicycle bottle cages. The water bottles are easy to squeeze, allowing you to take in more water with less effort. Our CamelBak reusable sports water bottles are engineered with a high flow, self-sealing cap, which maximizes flow rate while reducing spills and splashes. The Podium Chill is also 100% free of BPA, BPS, and BPF. This bottle also features Trutaste Polypropylene with HydroGuard materials so that you taste your water and nothing else, time after time. All parts are easy to separate, which makes cleaning a breeze. Our Got Your Bak Lifetime Guarantee covers all reservoirs, backpacks, bottles, and accessories from manufacturing defects in materials and workmanship for the lifetime of the product. The CamelBak Podium Bike Chill Insulated Squeeze Water Bottle is available in several colors, allowing you to pick one that matches your personality.

With double-walled construction to keep water cold twice as long as other bottles, the insulated CamelBak Podium Chill is the best-of-the-best for delivering cold, consistent cycling hydration. Features like optimized cage fit and improved cleanability continue to make this bottle a favorite among professionals and recreational users alike. It is and always has been 100% free of BPA, BPS and BPF. - Double-Walled Construction: Keeps water cold twice as long - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

Derived from superior materials including Trutaste Polypropylene with HydroGuard, and featuring double-wall insulation, the CamelBak Podium Chill Insulated Water Bottle is the perfect cold-storage water bottle for cycling adventures. Keeping your body properly hydrated and improving your on-road performance is simplified thanks to this revolutionary sports bottle. Cycling enthusiasts have for years trusted CamelBak to provide them superior bottles for water that are optimized for peak performance. And the Podium Chill bike water bottle continues to elevate CamelBak as the best of the best in the cycling world. This premium bicycle water bottle has been reengineered to securely fit in a variety of bicycle bottle cages. The water bottles are easy to squeeze, allowing you to take in more water with less effort. Our CamelBak reusable sports water bottles are engineered with a high flow, self-sealing cap, which maximizes flow rate while reducing spills and splashes. The Podium Chill is also 100% free of BPA, BPS, and BPF. This bottle also features Trutaste Polypropylene with HydroGuard materials so that you taste your water and nothing else, time after time. All parts are easy to separate, which makes cleaning a breeze. Our Got Your Bak Lifetime Guarantee covers all reservoirs, backpacks, bottles, and accessories from manufacturing defects in materials and workmanship for the lifetime of the product. The CamelBak Podium Bike Chill Insulated Squeeze Water Bottle is available in several colors, allowing you to pick one that matches your personality.

For hot days on the trail, the Podium Dirt Series Chill keeps your drink cold twice as long thanks to the insulated double-wall construction. The Podium Dirt Series is the premium bike bottle for mountain bikers who prioritize performance and functionality above all else. The Mud Cap keeps dirt and dust out of your bottle while the secure cage fit means you'll be able to swig and stow your bottle with confidence. Like all CamelBak Podium bottles, it features our high flow, self-sealing cap, easy-to-clean interface and easy-to-squeeze design. And, of course, it's 100% free of BPA, BPS and BPF. - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - Mud Cap: Drink water. Don't eat dirt. - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.

For hot days on the trail, the podium dirt series chill keeps your drink cold twice as long thanks to the insulated double-wall construction. As the ultimate bike bottle for both recreational and competitive cyclists alike, it features an integrated mud cap to keep the dirt out of your water, a high-flow self-sealing jet valve and easy to squeeze ergonomic design. The optimized cage fit means you won't fumble to grab or stow your bottle and because it's 100% free of BPA, BPS and BPF, you'll ingest nothing but cold, clean water. - Keeps your mouth clean and your drink cold twice as long - Double-walled construction: keeps water cold twice as long - Optimized cage fit: engineered to securely fit in a variety of bottle cages - Easy-to-clean interface: all parts can separate for thorough cleaning - Nozzle cover: keeps dirt out and your mouth clean

The Ultimate Drink Holder! ABC – ANY BOTTLE CAGE! Fits almost any bottle, cup, or container 2 1/4" to 4 3/4". Turn knob to tighten and turn to loosen. Crank it down so drink won't come out or set to desired interference fit for easy in or easy out. - Handlebar, frame, and seat post adapters available.

BiKASE's Handlebar/Seat Post Bottle Cage Bracket makes it easy to attach a bottle cage and bottle (both sold separately) to your handlebars or seat post. It's made of durable engineered plastic polymers and includes shims and hardware to fit on handlebars and seat posts with 24 to 32mm diameters or 32mm to 43mm diameters. It also rotates so you can set the bottle where you want it for easy access. • Material: POM head, PP bracket, Stainless steel hardware • Size: 8cm x 6cm x 2cm • Weight: 40 g • Fits handlebar 24mm-32mm • Versatile bracket rotates

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.

Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.

Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage

XLAB's Aqua Shot Calibrated Bottle has helped athletes win world championships and it'll help you perform your best, too. This unique, time-saving racing bottle has a high-flow squeeze valve and 4-ounce gradations so you can gauge your hydration. It's made of taste-free and safe BPA-free polyethylene with a fast-flow silicone valve that seals tight as soon as you stop squeezing. The valve is also not exposed to dust or contamination. This fine bottle is dishwasher top-shelf safe, can be used with carbonated beverages and is even shaped to fit better in bottle cages.

XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.

- High-tech insulated racing bottle keeps liquids cool - Ultra secure groove latches onto XLAB cages to prevent launching - Capacity: 20oz (600ml)

Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.