Other

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.

A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever. NO BLEEDING The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand. - Kit includes cable and housing - Compatible with all cable actuated dropper posts.

V2 dropper remote clamp for 22.2mm handlebar.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

- Aheadset preload adjusting bolt

Replacement small parts for Hope disc brake Hope disc brake calipers.

Hope Brake Lever Parts

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Replacement piston and seals for Hope disc brake calipers.

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

- Model: Replacement bolt - Compatibility: Allen, M5x16

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

Saddle clamp heads and lowers for KS Dropper posts.

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever